Amigurumi Cute Cat in Trash Can Free Crochet Pattern

Welcome to our website where you can find the most beautiful and highest quality samples of Amigurumi patterns. All the amigurumi patterns you can’t find are available on our website. Every day we continue to share new amigurumi patterns for you. Stay tuned to reach these amigurumi patterns before anyone else

Abbreviations:

Sc – single crochet,

inc – increase,

Dec – decrease

Hdc – half crochet

Trash Can (Color Silver)

1. Knit a chain from 4ch, 1ch, connect the ring.

2.6 loop in ring amigurumi = 6sc

3.1ch, * inc * x6.1ch = 12sc

4.1ch, * sc, inc * x6,1ch = 18sc

5.1ch, * 2sc, inc * x 6.1ch = 24sc

6.1ch, * 3sc, inc * x 6.1ch = 30sc

7.1ch, * 4sc, inc * x 6.1ch = 36sc

8.1ch, * 5sc, inc * x6,1ch = 42sc

9.1ch, * 6sc, inc * x6,1ch = 48sc

10.1ch, * 7sc, inc * x6.1ch = 54sc

11.1ch, * 8sc, inc * x6.1ch = 60sc

12.1ch, * 9sc, inc * x6.1ch = 66sc

13.1ch, * 10sc, inc * x6.1ch = 72sc

14.1ch, * 11sc, inc * x6.1ch = 78sc

15.1ch, * 12sc, inc * x6.1ch = 84sc

16.1ch, * 13sc, inc * x6.1ch = 90sc

17.1ch, * 14sc, inc * x6.1ch = 96sc

18.1ch, * 15sc, inc * x6.1ch = 102sc

19.1ch, * 16sc, inc * x6.1ch = 108sc

20.1ch, * 17sc, inc * x6.1ch = 114sc

21.1ch, * 18sc, inc * x6,1sl-st

(take the point for this is the inner diameter of the bottom of the tank, knit the back

little wall) = 120sc

22.1ch, * 19sc, inc * x6.1ch = 126sc

23.1ch, * 20sc, inc * x6.1ch = 132sc

24.1ch, 132sc, 1ch = 132sc

25.1ch, 132sc, 1ch = 132sc

26.1ch, 132sc, 1ch = 132sc

27.1ch, 132sc, 1ch = 132sc

Here we begin to knit strips – ribbons.

28.1ch, 12sc, 1ch and rotate = 12sc.

29.1sc, dec, 6sc, dec, 1sc, 1ch, rotation = 10sc.

30.1sc, dec, 4sc, dec, 1sc, 1ch, rotation = 8sc

31.8sc, 1ch, rotation = 8sc

Ribbons are knitted from 32–70 (40 rows) Repeat up to 31 rows-8sc.

71.inc., 6sc, inc., 1ch, rotation = 10sc.

72.inc., 8sc, inc., 1sc, rotation = 12sc

Also we knit other bands, one row next to another = 11 bands.

The inner part of the garbage barrel:

1.Chain from 4ch, 1ch-ring.

2.6sc, 1ch = 6sc

3.1ch, * inc * x6.1ch = 12sc

4.1ch, * 1sc, inc. * X 6.1ch = 18sc

5.1ch, * 2sc, inc. * X 6.1ch = 24sc

6.1ch, * 3sc, inc. * X 6.1ch = 30sc

7.1ch, * 4sc, inc. * X 6.1ch = 36sc

8.1ch, * 5sc, inc. * X 6.1ch = 42sc

9.1ch, * 6sc, inc. * X6,1ch = 48sc

10.1ch, * 7sc, inc. * X6,1ch = 54sc

11.1ch, * 8sc, inc. * X 6.1ch = 60sc

12.1ch, * 9sc, inc. * X6.1ch = 66sc

13.1ch, * 10sc, inc. * X 6.1ch = 72sc

14.1ch, * 11sc, inc. * X6.1ch = 78sc

15.1ch, * 12sc, inc. * X6.1ch = 84sc

16.1ch, * 13sc, inc. * X6.1ch = 90sc

17.1ch, * 14sc, inc. * X6.1ch = 96sc

18.1ch, * 15sc, inc. * X6.1ch = 102sc

19.1ch, * 16sc, inc. * X6.1ch = 108sc

20.1ch, * 17sc, inc. * X6.1ch = 114sc

21.1ch, * 18sc, inc. * X6,1sl-st (take a point for this is the inner diameter of the tank bottom, knit the back wall of the small box) = 120sc

22.1ch, * 19sc, inc. * X6.1ch = 126sc

23.1ch, 126sc, 1ch = 126sc

24.1ch, 126sc, 1ch = 126sc

25.1ch, 126sc, 1ch = 126sc

26.1ch, 126sc, 1ch = 126sc

27.ch, * 20sc, inc. * X6,1ch = 132sc

Here, start by doing a strip of the same as above.

28.1ch, 12sc, 1ch, rotation = 12sc

29.1sc, dec, 6sc, decrease, 1sc, 1ch, rotate = 10sc

30.1sc, dec, 4sc, dec, 1sc, 1ch, rotate = 8sc

31.8sc, 1ch, rotate = 8sc

32-70. Repeat up to 31 rows.

71.inc., 6sc, inc., 1ch, rotate = 10sc

72.inc., 8sc, inc., 1ch, rotate = 12sc

Also we knit other stripes, one row next to another.

Take two reasons to impose a friend on a circle in 21 places together

the back of the basement wall so that it leaves one another on another strip.

Next, begin to bind the scsc, leaving the top unbound

part of the strip – 12sc, for filling.

Once this is done for each strip, connect all 11 bandssc in

circle, continue to link to the outside of the tank:

1-6 row: 132sc, 1ch = 132sc

7.1ch, * 21sc, inc. * X 6.1ch = 138sc

8.1ch, * 22sc, inc. * X 6.1ch = 144sc

9.1ch, * 23sc, inc. * X6.1ch = 150sc

10-12 row: 1ch, 150sc, 1ch = 150sc

Now for the inside of the tank

1.132sc, 1ch (knit around) = 132sc

2.1ch, * 21sc, inc. * X 6.1ch = 138sc

3.1ch, * 22sc, inc. * X 6.1ch = 144sc

4.1ch, * 23sc, inc. * X 6.1ch = 150sc

Combine the upper part of the inner side and start filling.

Now stitch the edges of the loops between the strips of the tank

Knit 11 stripes of black for flashing between the sides of the tank.

1. Knit a chain from 52ch, 1ch, turn.

2. On the 2nd side of the chain from knit 50sc, at the end of the last loop 3

sccontinue

Opposite Party 50sc, ch. Pet. 2sc, sl-st.

Eleven knitted stripes

Next to the lid of the tank 2 details.

1. Chain of 4ch, 1ch-amigurumi.

2.6sc, 1ch = 6sc

3. * inc * x6 = 12sc

4. * 1sc, inc. * X6 = 18sc

5. * 2sc, inc. * X6 = 24sc

6. * 3sc, inc. * X6 = 30sc

7. * 4sc, inc. * X6 = 36sc (this way, they will pull back from the back wall)

8. * 5sc, inc. * X6 = 42sc

9. * 6sc, inc. * X6 = 48sc

10. * 7sc, inc. * X6 = 54sc

11. * 8sc, inc. * X6 = 60sc

12. * 9sc, inc. * X6 = 66sc

13. * 10sc, inc. * X6 = 72sc (in this case, they will pull back from the back wall)

14. * 11sc, inc. * X6 = 78sc

15. * 12sc, inc. * X6 = 84sc

16. * 13sc, inc. * X6 = 90sc

17. * 14sc, inc. * X6 = 96sc

18., * 15sc, inc. * X6 = 102sc

19. * 16sc, inc. * X6 = 108sc (this way, they will pull back from the back wall)

20. * 17sc, inc. * X6 = 114sc

21. * 18sc, inc. * X6 = 120sc

22. * 19sc, inc. * X6 = 126sc

23. * 20sc, inc. * X6 = 132sc

24. * 21sc, inc. * X6 = 138sc

25. * 22sc, inc. * X6 = 144sc (this way, they will pull back the back wall)

26. * 23sc, inc. * X6 = 150sc

27. * 24sc, inc. * X6 = 156sc

28. * 25sc, inc. * X6 = 162sc

29. * 26sc, inc. * X6 = 168sc

Now we sew the covers on the side of the can 7 and 13 rows (fill), 19 and 25 rows

(fill the circle)

Then the edges of one cover are connected to the other half in 29 row

Proceed:

30.168sc, 1ch = 168sc

31.1ch, * 27sc, inc. * X6.1ch (this way, we pull the back wall) = 174sc

32.1ch, * 28sc, inc * .x6.1ch = 180sc

33–44 row: 1ch, 180sc, 1ch = 180sc

45.1ch, * 28sc, dec. * X6,1ch = 174sc

46.1ch, * 27sc, dec. * X 6.1ch = 168sc

Connect 46strings31 (through the backs of the loops that were left)

Handle (2 parts):

1-10 row: 10sc, 1ch, rotate = 10sc

11.10sc (this row behind the back wall), 1ch, rotate = 10sc

12.10sc, 1ch, turn-repeat up to 37 rows = 10sc

38.10sc (this row behind the back wall), 1ch, rotate = 10sc

39–46 row: 10sc, 1ch, rotate = 10sc

Strip: 11 rows (back loops) with a strip of 38 rows of another strip.

Tie sc

Sew to the top!

Cat1-brown-florets

Link Base2 details:

1. Make a magic ring:

2.6sc, 1ch = 6sc

3. * inc * x6 = 12sc

4. * 1sc, inc. * X6 = 18sc

5. * 2sc, inc. * X6 = 24sc

6. * 3sc, inc. * X6 = 30sc

7. * 4sc, inc. * X6 = 36sc (this way, they will pull back from the back wall)

8. * 5sc, inc. * X6 = 42sc

9. * 6sc, inc. * X6 = 48sc

10. * 7sc, inc. * X6 = 54sc

11. * 8sc, inc. * X6 = 60sc

Connect the base of the sc to fill with a pebble.

Body:

1.Pick up a pair of 10ch, 1ch

2. Tie the chain 9sc, the last loop 3sc,

Opposite side knit 8sc, last one 2sc = 22sc

3.inc., 8sc, inc., Inc., Inc., 8sc, inc., Inc. = 28sc

4.1sc, inc., 8sc, * 1sc, inc. * X3.8sc, * 1sc, inc. * X2 = 34sc

5.2sc, inc., 8sc, * 2sc, inc. * X3.8sc, * 2sc, inc. * X2 = 40sc

6.3sc, inc., 8sc, * 3sc, inc. * X3,8sc, * 3sc, inc. * X2 = 46sc

7.46sc = 46sc

8.4sc, inc., 8sc, * 4sc, inc. * X3,8sc, * 4sc, inc. * X2 = 52sc

9.52sc = 52sc

10.5sc, inc., 8sc, * 5sc, inc. * X3,8sc, * 5sc, inc. * X2 = 58sc

11.58sc = 58sc

12.6sc, inc., 8sc, * 6sc, inc. * X3,8sc, * 6sc, inc. * X2 = 64sc

13.64sc = 64sc

14.7sc, inc., 8sc, * 7sc, inc. * X3,8sc, * 7sc, inc. * X2 = 70sc

15.70sc = 70sc

16.8sc, inc., 8sc, * 8sc, inc. * X3,8sc, * 8sc, inc. * X2 = 76sc

17.76sc = 76sc

18.9sc, inc., 8sc, * 9sc, inc. * X3,8sc, * 9sc, inc. * X2 = 82sc

19.82sc = 82sc

20.10sc, inc., 8sc, * 10sc, inc. * X3.8sc, * 10sc, inc. * X2 = 88sc

21.88sc = 88sc

22.11sc, inc., 8sc, * 11sc, inc. * X3.8sc, * 11sc, inc. * X2 = 94sc

23.12sc, inc., 8sc, * 12sc, inc. * X3.8sc, * 12sc, inc. * X2 = 100sc

24.13sc, inc., 8sc, * 13sc, inc. * X3.8sc, * 13sc, inc. * X2 = 106sc

25.14sc, inc., 8sc, * 14sc, inc. * X3.8sc, * 14sc, inc. * X2 = 112sc

26–31 row: 112sc = 112sc

32.14sc, dec, 8sc, * 14xsc, dec. * X3,8sc, * 14sc, dec. * X2 = 106sc

33–34 row: 106sc = 106sc

35.13sc, dec., 8sc, * 13sc, dec. * X3,8sc, * 13sc, dec. * X2 = 100sc

36.100sc = 100sc

37.12sc, dec., 8sc, * 12sc, dec. * X3.8sc, * 12sc, dec. * X2 = 94sc

38.11sc, dec., 8sc, * 11sc, dec. * X3.8sc, * 11sc, dec. * X2 = 88sc

39.10sc, dec., 8sc, * 10sc, dec. * X3.8sc, * 10sc, dec. * X2 = 82sc

40.9sc, dec, 8sc, * 9sc, dec * x3,8sc, * 9sc, dec * x2 = 76sc

41.8sc, dec, 8sc, * 8sc, dec * x3,8sc, * 8sc, dec * x2 = 70sc

42.7sc, dec, 8sc, * 7sc, dec * x3,8sc, * 7sc, dec * x2 = 64sc

43.6sc, dec, 8sc, * 6sc, dec * x3,8sc, * 6sc, dec * x2 = 58sc

44.5sc, dec, 8sc, * 5sc, dec * x3,8sc, * 5sc, dec * x2 = 52sc

45. * 12sc, inc. * X4 = 56sc

46. ​​* 13sc, inc. * X4 = 60sc

47.60sc = 60sc

48. * 14sc, inc. * X4 = 64sc

49. * 15sc, inc. * X4 = 68sc

50. * 16sc, inc. * X4 = 72sc

51. * 17sc, inc. * X4 = 76sc

52. * 18sc, inc. * X4 = 80sc

53. * 19sc, inc. * X4 = 84sc

54. * 20sc, inc. * X4 = 88sc

55.88sc = 88sc

56. * 21sc, inc. * X4 = 92sc

57.92sc = 92sc

58. * 22sc, inc. * X4 = 96sc

59.96sc = 96sc

60. * 23sc, inc. * X4 = 100sc

61.100sc = 100sc

62. * 24sc, inc. * X4 = 104sc

63.104sc = 104sc

Start filling out.

64. * 25sc, inc * x4 = 108sc

65.108sc = 108sc

66. * 26sc, inc. * X4 = 112sc

67–76 row: 112sc = 112sc

77. * 26sc, dec. * X4 = 108sc

78.108sc = 108sc

79. * 16sc, dec. * X6 = 102sc

80. * 15sc, dec. * X6 = 96sc

81. * 14sc, dec. * X6 = 90sc

82. * 13sc, dec. * X6 = 84sc

83. * 12sc, dec. * X6 = 78sc

84. * 11sc, dec. * X6 = 72sc

85. * 10sc, dec. * X6 = 66sc

86. * 9sc, dec. * X6 = 60sc

Complete the filling and unite the base-bottom with a skeleton, tie sc

round.

Ears (2pcs)

The ears of the cat are detached inside, which are knitted separately.

Then, the inside is attached to the detection fly.

1.Inner ear (2pcs)

Apricot blossom, hook 2mm. Knits in swivel rows, end

each row, knits a loop for lifting.

1.2vv, 1ch

2.2sc, 1ch, rotation = 2sc

3. * inc. * X2.1ch, rotate = 4sc

4.inc., 2sc, inc., 1ch, turn = 6sc

5.6sc, 1ch, rotation = 6sc

6.inc., 4sc, inc., 1ch, turn = 8sc

7.8sc, 1ch, turn = 8sc

8.8sc, 1ch, turn = 8sc

9.inc., 6sc, inc., 1ch, rotate = 10sc

10.10sc, 1ch, rotate = 10sc

At the end of the knitting, as shown by the arrows on the photo, in the direction of the tie

details around

2.External ears (2pcs)

1.Magic ring.

2.6sc = 6sc

3. * 1sc, inc. * X3 = 9sc

4. * 2sc, inc. * X3 = 12sc

5. * 3sc, inc. * X3 = 15sc

6.4sc *, inc. * X3 = 18sc

7. * 5sc, inc. * X3 = 21sc

8. * 6sc, inc. * X3 = 24sc

9. * 7sc, inc. * X3 = 27sc

10. * 8sc, inc. * X3 = 30sc

11. * 9sc, inc. * X3 = 33sc

12. * 10sc, inc. * X3 = 36sc

13. * 11sc, inc. * X3 = 39sc

14.39sc = 39sc

Sew together the last row of the outer ear. Sew inside the inner ear to the outer.

Ears with pins will fix on the head. Then sew them.

Muzzle:

Cream color, crocheted2mm

Knits around the spiral.

1.6ch, 1ch

2.1ssl-sth hook, 4sc-3sc next loop, (other side), 4sc-2sc

after pet = 14sc

3.inc., 4sc, inc., Inc.inc., 4sc, inc., Inc. = 20sc

4.1sc, inc., 4sc * 1sc, inc. * X3,4sc * 1sc, inc. * X2 = 26sc

5.2sc, inc., 4sc, * 2sc, inc. * X3,4sc, * 2sc, inc. * X2 = 32sc

6.3sc, inc., 4sc, * 3sc, inc. * X3,4sc, * 3sc, inc. * X2 = 38sc

7.4sc, inc., 4sc, * 4sc, inc. * X3,4sc, * 4sc, inc. * X2 = 44sc

8.5sc, inc., 4sc, * 5sc, inc. * X3,4sc, * 5sc, inc * x2 = 50sc

9.50sc = 50sc

10.6sc, inc., 4sc, * 6sc, inc. * X3,4sc, * 6sc, inc. * X2 = 56sc

11-12 row: 56sc = 56sc

As shown in the photo: from the black arrow, count 20sc, and where the blue arrow,

there to knit:

1.9sc, 1ch, rotate = 9sc

2.9sc, 1ch, rotate = 9sc

3.1sc, dec., 3sc, dec., 1sc, 1ch, rotate = 7sc

4.7sc, 1ch, rotate = 7sc

5.dec., 3sc, dec.1ch, rotate = 5sc

6.5sc, 1ch, rotate = 5sc

7.dec., 1sc, dec.1ch, rotate = 3sc

8.3sc = 3sc

Then the item is tied around a circlesc, as shown by the arrows in the photo.

Nose:

Knitted with pink flowers

1.Chain from 4ch, 1ch

2.1sc for the next pet hook, 2sc, 3sc for the next pet., (Other party), 2sc and

2scFollow = 10sc

3.inc., 2sc, inc., Inc., Inc., 2sc, inc., Inc. = 16sc

4.1sc, inc., 2sc, * 1sc, inc. * X3,2sc, * 1sc, inc. * X2 = 22sc

5–6 row: 22sc = 22sc

7.1sc, dec., 2sc, * 1sc, dec. * X3,2sc, * 1sc, dec. * X2 = 16sc

Sew on a scord, filling out a filler. Sew the stitch to the head.

Twist the dagger a little bit and divide by the long stitch the muzzle of the dome,

tighten and

just split and fasten the dark thread, hide the ends.

must be divided into halves, as soon as other parts are sewn

faces. This woman survive a little orky.

Eyes

1. magic ring:

2.6sc = 6sc

3.double = 12sc

4. * 1sc, inc. * X6 = 18sc

5. * 8sc, inc. * X2 = 20sc

6. * 9sc, inc. * X2 = 22sc

7-8 row: 22sc = 22sc

9. * 9sc, dec. * X2 = 20sc

10.20sc = 20sc

11. * 3sc, dec. * X4 = 16sc

12. * 2sc, dec. * X4 = 12sc

13. * dec. * X6 = 6sc

Here, collapse in half, cup a fill with filler and sew to the head

Kotanadmordoi.

Abdomen

The overlay of the belly is tied with strands of apricot color and a hook 2 mm. Then

It must be sewn on the front of the lakota.

It is knitted with direct knitting, in the center of the neck, it is knitted with a loop for lifting.

1.Tie a chain from 8ch and 1ch = 8ch

2.8sc, 1ch, rotate = 8sc

3.inc., 6sc, inc., 1ch., Rotate = 10sc

4.10sc, 1ch = 10sc

5.inc., 8sc, inc., 1ch = 12sc

6.12sc, 1ch = 12sc

7.inc., 10sc, inc., 1ch = 14sc

8.14sc, 1ch = 14sc

9.inc., 12sc, inc., 1ch = 16sc

10.16sc, 1ch = 16sc

11.inc., 14sc, inc., 1ch = 18sc

12.18sc, 1ch = 18sc

13.inc., 16sc, inc., 1ch.turn = 20sc

14.20sc, 1ch, rotate = 20sc

15.inc., 18sc, inc., 1ch, turn = 22sc

16.22sc, 1ch, and rotate = 22sc

17.inc., 20sc, inc., 1ch, rotate = 24sc

18–23 row: 24sc, 1ch, rotate = 24sc

24.sc, dec., 18sc, dec, 1sc, 1ch, rotate = 22sc

25.22sc, 1ch, rotate = 22sc

26.sc, dec., 16sc, dec., Sc, 1ch, rotate = 20sc

27.sc, Ub14sc, dec., Sc, 1ch, rotate = 18sc

28.sc, dec., 12sc, dec., Sc, 1ch.turn = 16sc

29.1sc, dec, 10sc, dec, 1sc, 1Ch = 14sc

30.1sc, dec, 8sc, dec, 1sc, 1Ch = 12sc

31.1sc, dec, 6sc, dec, 1sc = 10sc

At the end, tie the sc around around as indicated by the blue arrows, then sew

a kitten.

Forelimbs (2pcs):

Feet (2pcs):

The beginning of the paws of the cream color:

1.Set the chain from 6ch, 1ch

2.As shown in the figure: knit 5sc, 3ssl-sth last loop

opposite side 4sc and 2ssl-sth last loop = 14sc

3.inc., 4sc, inc., Inc., Inc., 4sc, inc., Inc. = 20sc

4.1sc, inc., 4sc, * 1sc, inc. * X3,4sc, * 1sc, inc. * X2 = 26sc

5.2sc, inc., 4sc, * 2sc, inc. * X3,4sc, * 2sc, inc. * X2 = 32sc

6.32sc = 32sc

7.3sc, inc., 4sc, * 3sc, inc. * X3,4sc, * 3sc, inc. * X2 = 38sc

8–9 row: 38sc = 38sc

10.3sc, dec., 4sc, * 3sc, dec. * X3,4sc, * 3sc, dec. * X2 = 32sc-Change color.

11-12 row: 32sc = 32sc

13. * 6sc, dec. * X4 = 28sc

14–15 row: 28sc = 28sc

16. * 5sc, dec. * X4 = 24sc-start filling.

17-18 row: 24sc = 24sc

19. * 2sc, dec. * X6 = 18sc

20. * 1sc, dec. * X6 = 12sc

Fold the button, knit the side together with 6sc as shown in the figure.

Upper part legs (2pcs)

1.Magic ring:

2.6sc = 6sc

3. * inc. * X6 = 12sc

4. * 2sc, inc. * X4 = 16sc

5. * 3sc, inc. * X4 = 20sc

6.20sc = 20sc

7. * 4sc, inc. * X4 = 24sc

8–15 row: 24sc = 24sc

16.4sc, dec. * X4 = 20sc

17. * 3sc, dec. * X4 = 16sc – start filling.

18. * 2sc, dec. * X4 = 12sc

Fold the knit, knit the side together with 6sc as shown in the figure.

Then sew the flaps and the upper part.

dark, three-long stitches, piercing the leg through and through. Then

the ready-made knife to attach to the front of the calf and attach.

Hind Legs (2pcs)

Knit with cream color.

1.Set the chain from 8ch, 1ch.

2.As shown in the picture: knit 7sc, 3sc, the last loop of the chain,

opposite side 6sc, 2ssl-sth last loop = 18sc

3.inc., 6sc, inc., Inc.inc., 6sc, inc., Inc. = 24sc

4.1sc, inc., 6sc * 1sc, inc. * X3.6sc, * 1sc, inc. * X2 = 30sc

5.2sc, inc., 6sc, * 2sc, inc. * X36sc, * 2sc, inc. * X2 = 36sc

6.36sc = 36sc

7.3sc, inc., 6sc, * 3sc, inc. * X3.6sc, * 3sc, inc. * X2 = 42sc

8-10 row: 42sc = 42sc

11.3sc, dec., 6sc, * 3sc, dec. * X3,6sc, * 3sc, dec. * X2 = 36sc

12.36sc = 36sc

13.36sc = 36sc-Change color

14–16 row: 36sc = 36sc

17. * 7sc, dec * .x4 = 32sc

18.32sc = 32sc

19. * 6sc, dec. * X4 = 28sc

20. * 5sc, dec. * X4 = 24sc

21. * 4sc, dec. * X4 = 20sc

22. * 8sc, dec. * X2 = 18sc

23. * 1sc, dec. * X6 = 12sc

24. * dec. * X6 = 6sc

Deny close, thread fasten and cut.

Upper part of the rear valve (2pcs)

In the lower part of the house, we pick up the top with a hook, beginning at the side

heel 8sc, side-by-side 3sc, and frontal 10sc, must get = 24

sc.

We knit in a round knit, as usual, tied to the end, unforgettable

stuff

1–9 row: 24sc = 24sc

Add up the leg, knit the two sides together 12sc, as shown in the figure.

Embroider a little dark stitch with three long stitches, piercing

through the leg. Then, prepare the legs to attach to the back of the body

kitten and sew. With the socks on the bottom, the distance must be 8sc.

In order to attach the buttons to the body, you need to knit each

pedicle12sc.

Tail:

We begin to knit a cream color.

1.Magic ring:

2.6sc = 6sc

3. * inc. * X6 = 12sc

4. * 1sc, inc. * X6 = 18sc

5. * 8sc, inc. * X2 = 20sc

6. * 4sc, inc. * X4 = 24sc

7.24sc = 24sc

8. * 5sc, inc * .x4 = 28sc

9.28x = 28sc

10.28sc = 28sc – Change the color.

11-80 row: 28sc = 28sc-Filling the tail.

81. * 6sc, inc. * X4 = 32sc

82. * 7sc, inc. * X4 = 36sc

Defenses halve tie 18sc.

In order to attach the tail of the trunk, you need an endless loaf

count down by 5sc, find the middle of the body. combine the tail with the bottom and

tie 18sc.

Kitten2-gray

High-necked kitten:

Knit with a gray flower.

1.Set the chain from 8ch, 1ch.

2.As shown in the picture: knit 7sc, 3sc, the last loop of the chain,

opposite side 6sc, 2ssl-sth last loop = 18sc

3.inc., 6sc, inc., Inc.inc., 6sc, inc., Inc. = 24sc

4.1sc, inc., 6sc * 1sc, inc. * X3.6sc, * 1sc, inc. * X2 = 30sc

Head of kitten:

Knit with cream color.

1.Set the chain from 8ch, 1ch.

2.As shown in the picture: knit 7sc, 3sc, the last loop of the chain,

opposite side 6sc, 2sc last loop = 18sc

3.inc., 6sc, inc., Inc.inc., 6sc, inc., Inc. = 24sc

4.1sc, inc., 6sc * 1sc, inc. * X3.6sc, * 1sc, inc. * X2 = 30sc

5.2sc, inc., 6sc, * 2sc, inc. * X36sc, * 2sc, inc. * X2 = 36sc

6.3sc, inc., 6sc, * 3sc, inc. * X3,6sc, * 3sc, inc. * X2 = 42sc

7.4sc, inc., 6sc, * 4sc, inc. * X3,6sc, * 4sc, inc. * X2 = 48sc

8.48sc = 48sc

9.5sc, inc., 6sc, * 5sc, inc. * X3,6sc, * 5sc, inc. * X2 = 54sc

10.54sc = 54sc

11.6sc, inc., 6sc, * 6sc, inc. * X3,6sc, * 6sc, inc. * X2 = 60sc

12.60sc = 60sc

13.7sc, inc., 6inc, * 7sc, inc. * X3.6sc, * 7sc, inc. * X2 = 66sc

14.66sc = 66sc

15.8sc, inc., 6sc, * 8sc, inc. * X3,6sc, * 8sc, inc. * X2 = 72sc

16.72sc = 72sc

17.9sc, inc., 6sc, * 9sc, inc. * X3,6sc, * 9sc, inc. * X2 = 78sc

18.78sc = 78sc

19.10sc, inc., 6sc, 10inc *, inc. * X3.6sc, * 10sc, inc. * X2 = 84sc

20–25 row: 84sc = 84sc

26.10sc, dec., 6sc, * 10sc, dec. * X3,6sc, * 10sc, dec. * X2 = 78sc

27.9sc, dec., 6sc, * 9sc, dec. * X3,6sc, * 9sc, dec. * X2 = 72sc

28.8sc, dec., 6sc, * 8sc, dec. * X3,6sc, * 8sc, dec. * X2 = 66sc

29.7sc, dec., 6sc, * 7sc, dec. * X3,6sc, * 7sc, dec. * X2 = 60sc

30.6sc, dec., 6sc, * 6sc, dec. * X3,6sc, * 6sc, dec. * X2 = 54sc

31.5sc, dec., 6sc, * 5sc, dec. * X3,6sc, * 5sc, dec. * X2 = 48sc

32.4sc, dec., 6sc, * 4sc, dec. * X3,6sc, * 4sc, dec. * X2 = 42sc

33.3sc, dec., 6sc, * 3sc, dec. * X3,6sc, * 3sc, dec. * X2 = 36sc

34.2sc, dec., 6sc, * 2sc, dec. * X3,6sc, * 2sc, dec. * X2 = 30sc

Fill the head and attach to the base of the head.

Telokoshki:

Make marking with needles with a side head (near the bottom) = 33sc.Start

knit long scoop 13sc as indicated by white arrow, then follow

side 6sc, top 11sc, and side 6sc = 36sc

Continue tying around as follows:

1.36sc = 36sc

2.36sc = 36sc

3. * 8sc, inc. * X4 = 40sc

4.40sc = 40sc

5. * 9sc, inc. * X4 = 44sc

6. * 10sc, inc. * X4 = 48sc

7. * 11sc, inc. * X4 = 52sc

8. * 12sc, inc. * X4 = 56sc

9. * 13sc, inc. * X4 = 60sc

10. * 14sc, inc. * X4 = 64sc

11. * 15sc, inc. * X4 = 68sc

12. * 16sc, inc. * X4 = 72sc

13.72sc = 72sc

14. * 17sc, inc. * X4 = 76sc

15–16 row: 76sc = 76sc

17. * 18sc, inc. * X4 = 80sc

18–20 row: 80sc = 80sc

21. * 19sc, inc. * X4 = 84sc

22–27 row: 84sc = 84sc

28. * 12sc, dec. * X6 = 78sc

29-30 row: 78sc = 78sc

31. * 11sc, dec. * X6 = 72sc

32.72sc = 72sc

33. * 10sc, dec. * X6 = 66sc

34. * 9sc, dec. * X6 = 60sc

35. * 8sc, dec. * X6 = 54sc

36. * 7sc, dec. * X6 = 48sc

37. * 6sc, dec. * X6 = 42sc-fill

38. * 5sc, dec. * X6 = 36sc

39. * 4sc, dec. * X6 = 30sc

40. * 3sc, dec. * X6 = 24 mid

41. * 2sc, dec. * X6 (knit from the back wall – this will be in place

sewing on the stitch) = 18sc

42. * sc, dec. * X6 = 12sc

43. * dec. * X6 = 6sc

Ears (2pcs):

The ears of the kitten consist of an intrinsic part that knits

Separately. Then, the inside is attached to the detected fly.

1.Inner ear (2pcs)

Apricot blossom, hook 2mm. Knits in swivel rows, end

each row, knits a loop for lifting.

1.2vv, 1ch

2.2sc, 1ch, rotation = 2sc

3. * inc. * X2.1ch, rotate = 4sc

4.4sc = 4sc, rotate.

5.inc., 2sc, inc., 1ch, rotate = 6sc

6.6sc, 1ch, rotation = 6sc

At the end of the knitting, as shown by the arrows on the photo, in the direction of the tie

details around

2.External ears (2pcs)

1.Magic ring.

2.6sc = 6sc

3. * 1sc, inc. * X3 = 9sc

4. * 2sc, inc. * X3 = 12sc

5. * 3sc, inc. * X3 = 15sc

6.4sc *, inc. * X3 = 18sc

7. * 5sc, inc. * X3 = 21sc

8. * 6sc, inc. * X3 = 24sc

9. * 7sc, inc. * X3 = 27sc

10.27sc = 27sc

11. * 8sc, inc. * X3 = 30sc

12.30sc = 30sc

Sew together the last row of the outer ear. Sew inside the inner ear to the outer.

Ears with pins will fix on the head. Then sew them.

Muzzle:

Knitted with cream color

1.Chain from 4ch, 1ch

2.1sc for the next pet hook, 2sc, 3sc for the next pet., (Other party), 2sc and

2scFollow = 10sc

3.inc., 2sc, inc., Inc., Inc., 2sc, inc., Inc. = 16sc

4.1sc, inc., 2sc, * 1sc, inc. * X3,2sc, * 1sc, inc. * X2 = 22sc

5.2sc, inc., 2sc, * 2sc, inc * x3,2sc, * 2sc, inc. * X2 = 28sc

6.3sc, inc., 2sc, * 3sc, inc. * X3,2sc, * 3sc, inc. * X2 = 34sc

7.4sc, inc., 2sc, * 4sc, inc. * X3,2sc, * 4sc, inc. * X2 = 40sc

8.5sc, inc., 2sc * 5sc, inc. * X3.2sc, * 5sc, inc. * X2 = 46sc

9.46sc = 46sc

10.46sc = 46sc

Count down the black arrow17sc, enter the hook, where the blue arrow, and start

to knit.

1.8sc, 1ch, rotate = 8sc

2.8sc, 1ch, rotate = 8sc

3.1sc, dec., 2sc, dec., 1sc, 1ch, rotate = 6sc

4.6sc, 1ch, rotate = 6sc

5.dec., 2sc, dec.1ch, rotate = 5sc

6. * 1dec. * X2 = 2sc

Then the item is tied around a circlesc, as shown with black arrows on the photo.

Nose:

Knitted with pink flowers

1.Chain from 4ch, 1ch

2.1sc for the next pet hook, 2sc, 3sc for the next pet., (Other party), 2sc and

2scFollow = 10sc

3.inc., 2sc, inc., Inc., Inc., 2sc, inc., Inc. = 16sc

4–5 row: 16sc = 16sc

6.1dec., 5sc, dec., 7sc = 14sc

Fill the nose with filler, sew to the muzzle, then the mummy

sew on the head of the kitten, filling it with filler.

Eyes (2pcs)

1. magic ring:

2.6sc = 6sc

3. * inc * x6 = 12sc

4. * 2sc, inc. * X4 = 16sc

5–6 row: 16sc = 16sc

7. * 2sc, dec. * X4 = 12sc

8. * 4sc, dec. * X2 = 10sc

9. * dec. * X5 = 5sc

Here the eyes collapse in half, a cup fills with filler and sew

goblet

Hind legs:

Hips (2pcs)

Knit with a gray flower.

1. magic ring

2.6sc, 1ch = 6sc

3. * inc * x6 = 12sc

4. * 1sc, inc. * X6 = 18sc

5. * 2sc, inc. * X6 = 24sc

6. * 3sc, inc. * X6 = 30sc

7. * 4sc, inc. * X6 = 36sc

8. * 5sc, inc. * X6 = 42sc

9.42sc = 42sc

10. * 6sc, inc. * X6 = 48sc

11-12 row: 48sc = 48sc

Fill and sew to the back of the body.

Feet (2pcs)

Begin the feet with a cream color.

1.Set the chain from 6ch, 1ch

2.As shown in the picture: knit 5sc, 3sc the last loop of the chain,

opposite side 4sc and 2sc ch last loop = 14sc

3.inc., 4sc, inc., Inc., Inc., 4sc, inc., Inc. = 20sc

4.1sc, inc., 4sc, * 1sc, inc. * X3,4sc, * 1sc, inc. * X2 = 26sc

5.26sc = 26sc

6.2sc, inc., 4sc, * 2sc, inc. * X3,4sc, * 2sc, inc. * X2 = 32sc

7.32sc = 32sc

8.2sc, inc., 9sc, inc., 5sc, inc., 9sc, inc., 3sc = 36sc

9-10 row: 36sc = 36sc

11.36sc = 36sc-Change color

12-19 row: 36sc = 36sc

20. * 7sc, dec. * X4 = 32sc

21.32sc = 32sc

22. * 6sc, dec. * X4 = 28sc

23. * 5sc, dec. * X4 = 24sc

24. * 2sc, dec. * X6 = 18sc – Fill.

25. * 1sc, dec. * X6 = 12sc

26. * dec. * X6 = 6sc

Fill the end, close the hole and reunite with the shin.

Forelimbs (2pcs)

Begin the feet with a cream color.

1.Chain from 4ch, 1ch

2.1sc for the next pet hook, 2sc, 3sc for the next pet., (Other party), 2sc and

2scFollow = 10sc

3.inc., 2sc, inc., Inc., Inc., 2sc, inc., Inc. = 16sc

4.1sc, inc., 2sc, * 1sc, inc. * X3,2sc, * 1sc, inc. * X2 = 22sc

5.22sc = 22sc

6.2sc, inc., 2sc, * 2sc, inc * x3,2sc, * 2sc, inc. * X2 = 28sc

7.28sc = 28sc

8.inc., 12sc, inc., 14sc = 30sc

9.30sc = 30sc

10.30sc = 30sc-Change the color.

11-16 row: 30sc = 30sc

17. * dec., 13sc * x2 = 28sc

18.28sc = 28sc

19. * 5sc, dec * x4 = 24sc

20. * 4sc, dec. * X4 = 20sc – fill

21. * 3sc, dec * x4 = 16sc

22. * 2sc, dec * x4 = 12sc

Press the half of the foot into 6sc, then two stitches, piercing

foot through, embroider the basement.

Upper part legs (2pcs)

1.Magic ring:

2.6sc = 6sc

3. * inc. * X6 = 12sc

4. * 5sc, inc. * X2 = 14sc

5. * 6sc, inc. * X2 = 16sc

6. * 3sc, inc. * X4 = 20sc

7.20sc = 20sc

8.4sc, inc. * X4 = 24sc

9–10 row: 24sc = 24sc

11.4sc, dec. * X4 = 20sc

12.20sc = 20sc

13. * 8sc, dec. * X2 = 18sc – start filling.

14. * 7sc, dec. * X2 = 16sc

15. * 6sc, dec. * X2 = 14sc

16. * 5sc, dec. * X2 = 12sc

17.12sc = 12sc

Fold the knit, knit the side together with 6sc as shown in the figure.

Sew the upper part of the legs with the lower part, and then sew it in the front part

body.

Tail Kitten:

Start with a cream color.

1.Magic ring

2.6sc = 6sc

3. * inc. * X6 = 12sc

4. * 2sc, inc. * X4 = 16sc

5.16sc = 16sc

6. * 3sc, inc. * X4 = 20sc

7-8 row: 20sc = 20sc

9.20sc = 20sc – change of color.

11-70 row: 20sc = 20sc-Filling the tail.

71. * 4sc, inc. * X4 = 24sc

72–73 row: 24sc = 24sc

Sew a tail in 41 rows = 18sc, where we sew through the back of the wall.

The tail is beautifully curved and carefully sewn to the back. Kitten is ready !!!

FliesFish!

Fly

Wings (2pcs)

Knit a white color.

1.Magic ring:

2.5sc = 5sc

3. * inc. * X5 = 10sc

4–7 row: 10sc = 10sc

8. * 3sc, dec. * X2 = 8sc

Blue thread to increase the lead.

Head-teluhi

1.Magic ring:

2.6sc = 6sc

3. * inc. * X6 = 12sc

4. * 5sc, inc. * X2 = 14sc

5–6 row: 14sc = 14sc

7. * 5sc, dec. * X2 = 12sc

8. * dec. * X6 = 6sc

9. * inc. * X6 = 12sc

10. * inc. * X12 = 24sc

11–13 row: 24sc = 24sc

14. * 2sc, dec. * X6 = 18sc

15. * sc, dec. * X6 = 12sc

16. * dec. * X6 = 6sc

Flies make a twig on 3ch. Sew wings and eyes using white

felt beads.

Fish

Start with a cream and white color.

1. Ring amigurumi.

2.5sc = 5sc

3. * inc. * X5 = 10sc

4. * 1sc, inc. * X5 = 15sc

5.15sc = 15sc

6. * 2sc, inc. * X5 = 20sc

7.20sc = 20sc

8. * 3sc, inc. * X5 = 25sc

9.25sc = 25sc-change color.

10.25sc = 25sc –Knit back wall.

11–13 row: 25sc = 25sc

14.dec., 11sc, dec., 10sc = 23sc

15.dec., 10sc, dec., 9sc = 21sc

16.dec., 9sc, dec., 8sc = 19sc

17.dec., 8sc, dec., 7sc = 17sc

18.dec., 7sc, dec., 6sc = 15sc – filling.

19.dec., 6sc, dec., 5sc = 13sc

20.dec., 5sc, dec., 4sc = 11sc

21.dec., 4sc, dec., 3sc = 9sc – Change the color to light yellow.

22. * inc. * X9 = 18sc

23.1sc, inc., 8sc, inc., 7sc = 20sc

24.1sc, inc., 9sc, inc., 8sc = 22sc

25.4sc, further edging, the remaining sc remain unprocessed.

Tail halve and knit between both parties 11sc between 9 and

10 next to 25.

Fin on the back: color is the case yellow or mustard.

Insert the hook into the back of the fish as knit:

1.6sc, 1 chain stitch and rotate = 6sc

2.1dc, hdc, hdc, 1dc, conn.

Tail to beautify by embroidering the color in brighter

Flowers:

First flower:

Flower Center:

1.Magic ring:

2.6sc = 6sc

3. * inc. * X6 = 12sc

4. * sc, inc. * X6 = 18sc

5. * 2sc, inc. * X6 = 24sc

6. * 3sc, inc. * X6 = 30sc

7. * 4sc, inc. * X6 = 36sc

8.36sc (knit the back of the loop) = 36sc-change the color to green.

9.36sc = 36sc

10. * 4sc, dec. * X6 (knit the back of the loop) = 30sc

11. * 3sc, dec. * X6 = 24sc

12. * 2sc, dec. * X6 = 18sc-fill

13. * sc, dec. * X6 = 12sc

14.6sc = 6sc

We started to tie the twig in 14 row, separate the main loop 6

sc and knit a stem, like on the photo, the remaining ones are looped over.

15–62 row: 6sc = 6sc

63. * inc. * X6 = 12sc –the list begins here.

64. * 1sc, inc. * X6 = 18sc

65. * 2sc, inc. * X6 = 24sc

66–68 row: 24sc = 24sc

69. * dec., 10sc * x2 = 22sc

70. * dec., 9sc * x2 = 20sc

71. * dec., 8sc * x2 = 18sc

72. * dec., 7sc * x2 = 16sc

73. * dec., 6sc * x2 = 14sc

74. * dec., 5sc * x2 = 12sc

75. * dec., 4sc * x2 = 10sc

76. * dec., 3sc * x2 = 8sc

77. * dec., 2sc * x2 = 6sc

So we knit a technical dispenser until the point of the cloth is ready. For the second light

we return to 14 row, we introduce a hook in 13 row and knit such a rigid

remaining free loops.

14.6sc = 6sc –the second stalk.

15-102 row: 6sc = 6sc

103. * inc. * X6 = 12sc –the list begins here.

104. * 1sc, inc. * X6 = 18sc

105-107 row: 18sc = 18sc

108. * dec., 7sc * x2 = 16sc

109. * dec., 6sc * x2 = 14sc

110. * dec., 5sc * x2 = 12sc

111. * dec., 4sc * x2 = 10sc

112. * dec., 3sc * x2 = 8sc

113. * dec., 2sc * x2 = 6sc

At the end of the branches we make the petals and close the central stitch, at

using the needles of the green thread.

Light pink knit yellow hearts in a circle in a row.

* 5sc, inc. * X6 = 42sc

Flower leaf2 species: enaphthony are marked with blue and black

by arrows.

Leaves under black arrows (2pcs)

1.Magic ring

2.6sc = 6sc

3. * 2sc, inc * x2 = 8sc

4. * 3sc, inc. * X2 = 10sc

5. * 4sc, inc. * X2 = 12sc

6 * 5sc, inc. * X2 = 14sc

7. * 6sc, inc. * X2 = 16sc

8. * 7sc, inc. * X2 = 18sc

9–11 row: 18sc = 18sc

12. * 1sc, dec. * X6 = 12sc

13. * dec. * X6 = 6sc

14.dec., 4sc = 5sc

15.5sc = 5sc

Leaves under the blue arrows (3pcs)

1.Magic ring:

2.6sc = 6sc

3. * 2sc, inc. * X2 = 8sc

4. * 3sc, inc. * X2 = 10sc

5. * 4sc, inc. * X2 = 12sc

6 * 5sc, inc. * X2 = 14sc

7. * 6sc, inc. * X2 = 16sc

8-9 row: 16sc = 16sc

10. * 2sc, dec. * X4 = 12sc

11. * dec. * X6 = 6sc

12.dec., 4x = 5sc

13.5sc = 5sc

Petals in the shape of a heartboard (5pcs)

First cup

1.Magic ring:

2.6sc = 6sc

3. * inc. * X6 = 12sc

4. * 2sc, inc. * X4 = 16sc

5-7 row: 16sc = 16sc

Second cup

1.Magic ring:

2.6sbr = 6sc

3. * inc. * X6 = 12sc

4. * 2sc, inc. * X4 = 16sc

5-7 row: 16sc = 16sc

Combine Cups 3sc.

Insert the hook as on the photo and knit around.

8.26sc = 26sc

9. * dec., 11sc * x2 = 24sc

10. * dec., 10sc * x2 = 22sc

11. * dec., 9sc * x2 = 20sc

12. * dec., 8sc * x2 = 18sc

13. * dec., 7sc * x2 = 16sc

14. * dec., 6sc * x2 = 14sc

15. * dec., 5sc * x2 = 12sc

Fill and close the hole, fold in half, sew both sides, as

shown on the photo.

Light pink petals

Petals (5pcs)

1. magic ring:

2.6sc = 6sc

3. * 2sc, inc. * X2 = 8sc

4. * 3sc, inc. * X2 = 10sc

5-14 row: 10sc = 10sc

Embroider the details of the stitches, sew on the yellow heart, the heart color, the beginning large

petals, then dark to cover with space between large as

shown on the photo.

Second Flower:

Flower Center:

1.Magic ring:

2.6sc = 6sc

3. * inc. * X6 = 12sc

4. * sc, inc. * X6 = 18sc

5. * 2sc, inc. * X6 = 24sc

6.24sc (knit backstop); = 24sc-Change color to green.

7.24sc = 24sc

8. * 2sc, dec. * X6 = 18sc-fill

9. * sc, dec. * X6 = 12sc

10.6sc = 6sc

6th row knit in orange

* 3sc, inc. * X6 = 30sc

Petals flower in heart shape (6pcs).

First Cup:

1.Magic ring:

2.6sc = 6sc

3. * inc. * X6 = 12sc

4-5 row: 12sc = 12sc

Second Cup:

1.Magic ring:

2.6sc = 6sc

3. * inc. * X6 = 12sc

4-5 row: 12sc = 12sc

2-cups combine 3sc.

Then tie around as follows:

6.20sc = 20sc

7. * dec., 8sc * x2 = 18sc

8. * dec., 7sc * x2 = 16sc

9. * dec., 6sc * x2 = 14sc

10. * dec., 5sc * x2 = 12sc

11. * dec., 4sc * x2 = 10sc

Fill the petal, fold in half, sew the edges, embroider the stitches in color

thread and sew in an all-yellow heart flower.

Skeleton Fishes (blank):

Head and tail, tail (black arrow):

1.Magic ring:

2.6sc = 6sc

3. * 1sc, inc. * X3 = 9sc

4. * 2sc, inc. * X3 = 12sc

5. * 3sc, inc. * X3 = 15sc

6. * 4sc, inc. * X3 = 18sc

7. * 5sc, inc. * X3 = 21sc

8. * 6sc, inc. * X3 = 24sc

9-10 row: 24sc = 24sc

11.3sc, as on the other side 3sc = 6sc-ridges.

12-23 row: 6sc = 6sc

24. * inc. * X6 = 12sc-tail.

25. * 2sc, inc. * X4 = 16sc

26. * 3sc, inc. * X4 = 20sc

27.20sc = 20sc

28.3sc, fold in half halves snap 7sc

Large dice (2pcs) (blue arrow)

1.Magic ring:

2-6 row: 5sc = 5sc

Small pits (2pcs) (red arrow)

1.Magic ring:

2-4 row: 5sc = 5sc

Then suturing the bones to a large, small skeleton, as in the photo.

Algae (blank):

Algae1 is a dark green color.

1.Magic ring:

2.6sc = 6sc

3. * inc. * X6 = 12sc

4. * 5sc, inc. * X2 = 14sc

5. * 6sc, inc. * X2 = 16sc

6-7 row: 16sc = 16sc

8. * 6sc, dec. * X2 = 14sc

9. * 5sc, dec. * X2 = 12sc

10. * 4sc, dec. * X2 = 10sc

11. * 3sc, dec. * 2 = 8sc

12. * inc. * X8 = 16sc

13.16sc = 16sc

14. * 6sc, dec. * X2 = 14sc

15. * 5sc, dec. * X2 = 12sc

16.4sc, dec. * X2 = 10sc

17. * 3sc, dec. * X2 = 8sc

18.8sc = 8sc

19. * inc. * X8 = 16sc

20.16sc = 16sc

21. * 6sc, dec. * X2 = 14sc

22. * 5sc, dec. * X2 = 12sc

23. * 4sc, dec. * X2 = 10sc

24. * 3sc, dec. * X2 = 8sc

25-26 row: 8sc = 8sc

Algae2-dark green.

1.Magic ring:

2.6sc = 6sc

3. * inc. * X6 = 12sc

4. * 5sc, inc. * X2 = 14sc

5. * 6sc, inc. * X2 = 16sc

6. * 6sc, dec. * X2 = 14sc

7. * 5sc, dec. * X2 = 12sc

8. * 4sc, dec. * X2 = 10sc

9. * 3sc, dec. * 2 = 8sc

10.8sc = 8sc

11. * inc. * X8 = 16sc

12. * 5sc, dec. * X2 = 14sc

13. * 6sc, inc. * X2 = 16sc

14. * 6sc, dec. * X2 = 14sc

15. * 5sc, dec. * X2 = 12sc

16. * 4sc, dec. * X2 = 10sc

17. * 3sc, dec. * X2 = 8sc

18-19 row: 8sc = 8sc

Algae3-dark green

1.Magic ring:

2.6sc = 6sc

3. * inc. * X6 = 12sc

4. * 5sc, inc. * X2 = 14sc

5. * 6sc, inc. * X2 = 16sc

6. * 6sc, dec. * X2 = 14sc

7. * 5sc, dec. * X2 = 12sc

8. * 4sc, dec. * X2 = 10sc

9. * 3sc, dec. * 2 = 8sc

10-11 row: 8sc = 8sc

Algae 4,5,6,7-light green.

The beginning of 4-Khmorsk algae is the same.

Start:

1.Magic ring:

2.6sc = 6sc

3. * 2sc, inc. * X2 = 8sc

4. * 3sc, inc. * X2 = 10sc

Continued alga 7:

5-8 row: 10sc = 10sc

9. * 3sc, dec. * X2 = 8sc

10-11 row: 8sc = 8sc

Continuing the algae6:

5-12 row: 10sc = 10sc

13. * 3sc, dec. * X2 = 8sc

14-15 row: 8sc = 8sc

Continuing the alga 5:

5-14 row: 10sc = 10sc

15. * 3sc, dec. * X2 = 8sc

16-17 row: 8sc = 8sc

Continued alga 4:

5-22 row: 10sc = 10sc

23. * 3sc, dec. * X2 = 8sc

24-25 row: 8sc = 8sc

Then sew all the algae onto the sticks. Install the embellished

colored pebbles aquarium, add a fish.

All cats ready!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *