Amigurumi Cute Owl Free Crochet Pattern
Welcome to our website where you can find the most beautiful and highest quality samples of Amigurumi patterns. All the amigurumi patterns you can’t find are available on our website. Every day we continue to share new amigurumi patterns for you. Stay tuned to reach these amigurumi patterns before anyone else
Abbreviations:
SC – single crochet
İNC – increase
DEC – decrease
CH – chain
LIST OF NECESSARY MATERIALS AND
TOOLS:
1) for the body, Nako Paris yarn (60% polyamide, 40%
premium acrylic, 245m / 100g) – 1 pc. any color;
2) for scarf and cap yarn Bambino Kamteks (35%
merino wool, 65% acrylic, 150m / 50g) – half
hank of two contrasting colors;
3) for the feet yarn Bambino Kamteks (35% merino wool,
65% acrylic, 150m / 50g) brown or black –
Little;
4) aluminum or copper wire with a diameter of 2 mm for
legs – 120 cm;
5) insulating tape or tissue adhesive tape – a little;
6) doll eyes with a diameter of 25 mm are blue or green,
or hazel – 1 pair;
7) felt white for the eyes – a little;
8) false eyelashes or doll;
9) glue for attaching eyes, eyelashes and beak;
10) polymer clay for beak – a little;
11) scissors;
12) a needle with a big eye;
13) hook No. 3;
14) filler (holofiber, or synthetic winterizer, or
sintepuh) – about 50 – 70 g;
15) brown dry pastel for tinting (optional);
16) decoration elements – buttons, pompoms, rhinestones, etc.
(optional).
Note! You can take any yarn for clothes on
Your taste and color.
STEP 1. Taurus.
We knit from Nako Paris yarn, hook No. 3.
1 row: we collect a chain of 20 CH + 1 CH, with the second from
we knit a hook of a loop on a chain 18 SC, in the last
loop 3 SC, 18 SC on the other side of the chain of CH, 2
SC last loop (42)
2 row: İNC, 18 SC, 3 İNC, 18 SC, 2 İNC (48)
3 row: İNC, SC, 18 SC, (İNC, SC) * 3, 18 SC,
(İNC, SC) * 2 (54)
4 – 23 (20 rows): 54 SC (54)
24 row: (7 SC, DEC) * 6 (48)
25 row: 48 SC (48)
26 row: (6 SC, DEC) * 6 (42)
27 row: 42 SC (42)
28 row: 3 SC, İNC, (6 SC, İNC) * 5, 3 SC (48)
29 row: (7 SC, İNC) * 6 (54)
30 row: 4 SC, İNC, (8 SC, İNC) * 5, 4 SC (60)
31 row: (9 SC, İNC) * 6 (66)
32 row: 5 SC, İNC, (10 SC, İNC) * 5, 5 SC (72)
33 row: (11 SC, İNC) * 6 (78)
34 – 53 (20 rows): 78 SC (78)
We do not cut the thread yet.
We turn the canvas inside out, because it’s more fluffy there
(optional), and set aside for a while.
STEP 2. LEGS.
We take a wire with a diameter of 2 mm, a length of about 60
cm and do the leg preparation according to the scheme (see photo 1 – 2
below).
Then spread the finger with glue and tightly
wrap with brown (or black) threads.
Thus we wrap all 4 fingers and the leg itself
to a height of about 6 – 7 cm, the ends of the thread are fixed with glue.
We do the second leg in the same way.
Insert the finished legs into the previously connected body in
the first row of knitting from the bottom, departing from the edges of 2 cm.
We adjust the legs to the desired height, it can be
from 3 to 6 cm, and fix inside the body with electrical tape (or
tissue adhesive), wrapping it with a thick layer
per leg (see photo 4 – 5 below).
We twist the wire from the legs together,
isolate. After that, we stuff the body with the filler.
Connect the upper edges of the body with SL-ST (see photo 7 below),
fasten the thread, cut it off.
STEP 3. WINGS AND TAIL.
WINGS (2 pcs.)
We knit from the same threads as the body, turning
in rows.
1 row: we dial 2 CH, in the second loop we knit 2 SC, CH,
turn (2)
2 row: 2 İNC, CH, turn (4)
3 row: İNC, 2 SC, İNC, CH, turn (6)
4 row: İNC, 4 SC, İNC, CH, turn (8)
5 row: İNC, 6 SC, İNC, CH, turn (10)
6 row: İNC, 8 SC, İNC, CH, turn (12)
7 – 11 (5 rows): 12 SC, CH, turn (12)
12 row: DEC, 8 SC, DEC, CH, turn (10)
13 row: DEC, 6 SC, DEC, CH, turn (8)
14 row: DEC, 4 SC, DEC (6)
We fix the thread, leave the end for sewing
wing, cut off.
We knit the second wing in the same way.
Sew the wings on the sides of the body, backing away
approximately 3 rows of SC from the neck (see photo 3 below).
TAIL.
We knit from the same threads as the body, turning
in rows.
1 row: we collect a chain of 11 CH, from the second from the hook
we knit loops on a chain 10 SC, CH, rotation (10)
2 – 4 (3 rows): 10 SC, CH, turn (10)
5 row: DEC, 6 SC, DEC, CH, turn (8)
6 – 10 (5 rows): 8 SC, CH, turn (8)
In the 10th row we do not cut the thread, continue to bind
tail:
first we knit SC along the side of the tail, then 2
SC to bottom corner, 5 DC to next loop down
tail, SC skip, SC, SC skip, 5 DC in
next loop, SC skip, SC, 5 DC in
the next loop, 2 SC to the bottom corner of the tail, then
again we knit SC on the side of the tail to the top
angle.
We fix the thread, leave the end for sewing
tail, cut.
Sew the tail in the center back (see photo 4 above).
STEP 4. DECORATION.
EYES.
1) Cut out from white felt 2 blanks for the eyes in size
(W * H) 3 * 4 cm. Make scissors in the blanks in the center
small cuts (see photo below).
2) Insert the blue (or any other) eyes into the incisions –
pupils with a diameter of 25 mm.
3) Glue the pupils to the felt details of the eyes with super-glue.
4) On top of the felt part of the eyes, glue the overhead
eyelashes.
5) Ready eyes try on an owl on the head, placing
them in the 17th row from the top row of knitting. Rasl-stoyanie
between the eyes you can do whatever you like
like it.
6) Glue the eyes with transparent super-glue to the head.
7) Make the tint around the eyes brown dry
pastel (optional).
BEAK.
Option 1. Made of polymer clay.
We sculpt the beak from polymer clay yellow, orange
or brown. I got a beak in the form
equilateral triangle with sides approximately 1
see. You can make a beak of any size as desired.
The reverse side of a thick needle is done on top of
beak two holes that mimic the nostrils.
We bake the finished beak according to the instructions, give
cool and glue with super-glue to the head between the eyes.
Option 2. Knitted beak.
Knit yellow, orange or brown
strings (optional). I took yarn with a density
150m / 50g, hook No. 2.
1 row: dial 2 CH, in the second from the hook we knit a loop
2 SC, CH, turn (2)
2 row: 2 İNC, CH, turn (4)
3 row: İNC, 2 SC, İNC (6)
We don’t cut the thread, we tie the beak along the SL-ST contour,
then fix the thread and cut it.
Sew the knitted beak with black threads
small stitches in the places where they are located
the nostrils.
After the owl is completely ready, comb
it with Velcro or scallop with rare cloves.
STEP 5. CLOTHES.
CAP.
First, we knit the bottom elastic for the cap in white
strings (see photo 1 – 2 above).
1 row: dial 4 CH + 1 CH, from the second from the loop hook
we knit 4 SC, CH, turn (4)
2 – 54 (53 rows): behind the RFP 4 SC, CH, turn (4)
Do not cut the thread, connect the edges of the elastic: 4 SL-ST for both
half loops.
We continue knitting, we tie a rubber band on top of SC.
1 row: 54 SC (54) and then we knit in a spiral.
2 – 3 row: 54 SC (54)
Change the color of the thread to turquoise (optional).
Note! If you want to knit striped
cap, like me, then change the thread color through
every 4 rows of white and 3 rows of turquoise.
4 row: (7 SC, DEC) * 6 (48)
5 – 7 (3 rows): 48 SC (48)
8 row: (6 SC, DEC) * 6 (42)
9 – 11 (3 rows): 42 SC (42)
12 row: (5 SC, DEC) * 6 (36)
13 – 15 (3 rows): 36 SC (36)
16 row: (4 SC, DEC) * 6 (30)
17 – 20 (4 rows): 30 SC (30)
21 row: (3 SC, DEC) * 6 (24)
22 – 25 (4 rows): 24 SC (24)
26 row: (2 SC, DEC) * 6 (18)
27 – 30 (4 rows): 18 SC (18)
31 row: (SC, DEC) * 6 (12)
32 – 35 (4 rows): 12 SC (12)
36 row: 6 DEC (6)
We pull the remaining hole, fasten the thread,
cut off.
Sew on top of the cap pompom, decorate the cap
buttons or other decorative elements (optional).
SCARF.
First we knit with white threads.
1 row: dial 150 CH + 2 CH, with the third from the hook
we knit loops 150 DC, CH, turn (150)
Change the thread to turquoise (optional).
2 row: 2 CH, 149 DC, CH, turn (150)
Change the thread to white.
3 row: 2 CH, 149 DC (149)
We fix the thread, cut it off.
The ends of the scarf are decorated with pompons or fringe (according
desire).
We put the cap and scarf on the owlet.
CONGRATULATIONS! YOUR OWL IS READY !!!
