Amigurumi Bunny Dolls Free Crochet Pattern
Welcome to our website where you can find the most beautiful and highest quality samples of Amigurumi patterns. All the amigurumi patterns you can’t find are available on our website. Every day we continue to share new amigurumi patterns for you. Stay tuned to reach these amigurumi patterns before anyone else
Abbreviations:
SC – single crochet
İNC – increase
DEC – decrease
CH – chain
About the hook:
For a good result, make sure you use a smaller hook
size than is usually recommended for your yarn. So, you will have
sufficiently dense knit, which will avoid large holes between
columns through which the filler could peek. So
Thus, if the yarn manufacturer recommends using a 3.5 hook, then
better to hook 3.
About yarn:
Personally, I prefer to use cotton yarn for this kind of project,
as it will not stretch after you press the parts tightly.
Its advantage is also that it is very durable. If you decide
use a different yarn then for optimal results
Choose not elastic and durable. The thickness of the yarn does not matter much, just your toy will be of different sizes.
About filler:
There are many types of fillers and the choice is yours. For the best
The result is recommended to densely stuff the details as much as possible.
Body:
We knit with yarn of the 2nd additional color
1p – 6 sc into magic ring
2p – 6inc (12)
3p – (1sc, inc) * 6 (18)
4p – (2sc, inc) * 6 (24)
5p – (3sc, inc) * 6 (30)
6p – (4sc, inc) * 6 (36)
7p – (5sc, inc) * 6 (42)
8p – (6sc, inc) * 6 (48)
9p – (7sc, inc) * 6 (54)
10-18rr – 54sc (9 rows)
19p – (7sc, dec) * 6 (48)
Change color to primary.
20-21rr – 48sc (2 rows)
22p – (6sc, dec) * 6 (42)
23-24rr – 42sc (2 rows)
25p – (5sc, dec) * 6 (36)
26p – 36sc
27p – (4sc, dec) * 6 (30)
28p – 30sc
29p – (3sc, dec) * 6 (24)
30p – 24sc
31p – (2sc, dec) * 6 (18)
32p – 18 sc
Finish sl-st. Trim the thread. Tightly fill with filler.
If you knit a bunny boy, then you need to change the color to the main one after
17th row. Everything else is the same as that of a girl.
Tail:
Knit with the main color yarn
1p – 6 sc into magic ring
2p – 6inc (12)
3p – (1sc, inc) * 6 (18)
4-5rr – 18sc (2 rows)
6p – (dec, 1sc) * 6 (12)
7p – 12sc
Finish knitting sl-st. Trim the yarn, leaving a tail that is long enough
(30cm) for sewing.
Head:
Knit with the main color yarn.
1p – 6 sc into magic ring
2p – 6inc (12)
3p – (1sc, inc) * 6 (18)
4p – (2sc, inc) * 6 (24)
5p – (3sc, inc) * 6 (30)
6p – (4sc, inc) * 6 (36)
7p – (5sc, inc) * 6 (42)
8p – (6sc, inc) * 6 (48)
9p – (7sc, inc) * 6 (54)
10-18rr – 54sc (9 rows)
19p – (7sc, dec) * 6 (48)
20p – (6sc, dec) * 6 (42)
21p – (5sc, dec) * 6 (36)
22p – (4sc, dec) * 6 (30)
23p – (3sc, dec) * 6 (24)
24p – (2sc, dec) * 6 (18)
Finish knitting sl-st. Trim the yarn, leaving
sufficient tail length (80cm) to
sew the head to the body. Put your eyes between
17 and 18 rows at the standard position 11 sc. Stuff
the head is very tight.
Beanie:
We knit with yarn of the 1st extra. colors.
1p – 6 sc into magic ring
2p – 6inc (12)
3p – (1sc, inc) * 6 (18)
4p – (2sc, inc) * 6 (24)
5p – (3sc, inc) * 6 (30)
6p – (4sc, inc) * 6 (36)
7p – (5sc, inc) * 6 (42)
8p – (6sc, inc) * 6 (48)
9p – (7sc, inc) * 6 (54)
10-21rr – 54sc (12 rows)
22p – (7sc, dec) * 6 (48)
Change color to 2nd add. color (purple)
23p – (6sc, dec) * 6 (42)
Finish knitting sl-st. Leave the thread for sewing to the head about 30 cm.
Note. I knitted the hat exactly according to the description, and I got it
very deep. Perhaps it would be better if you knit not 12 rows of 54sc, but
10.
Pens (2pcs):
Knit with the main color yarn
1p – 6 sc into magic ring
2p – 6inc (12)
3p – (1sc, inc) * 6 (18)
4p – (5sc, inc) * 3 (21)
5-6p – 21sc (2 rows)
7p – (dec, 1sc, dec, 2sc) * 3 (15)
8p – 15sc
Change color to 1st additional color
9p – 15sc
10p – dec, 5sc, dec, 6sc (13)
Change color to primary
11-12rr – 13sc
13p – dec, 11sc (12)
14-17rr – 12sc (4 rows)
Fill tightly with filler. The rest of the handle does not need to be filled.
18p – dec, 10sc (11)
19-25rr – 11sc (7 rows)
Knit another 1sc, then fold in half and knit 5sc. Crop
yarn, leaving a tail long enough (30cm) for sewing.
Legs (2pcs):
We knit with yarn of the 1st extra. colors
1p – Dial 6 ch Starting from the 2nd from the hook loop, 4sc, 4sc to the last
a loop. Turn the work and knit from the back, 4sc, 3sc to the last
loop (15)
2p – 1inc, 4sc, 3inc, 5sc, 2inc (21)
3p – 2inc, 6sc, 2inc, 8sc, 3inc (28)
4p – 1inc, 27sc (29)
5p – we knit for the back wall of the loop 29sc (29)
6-7rr – 29sc (2 rows)
8p – 9sc, 4dec, 10sc, dec (24)
Change color to primary
9p – 9sc, 3dec, 9sc (21)
10p – 9sc, 3sc knit together, 9sc (19)
11p – 9sc, dec, 8sc (18)
12p – 18sc
13p – (dec, 4sc) * 3 (15)
14-16rr – 15sc (3 rows)
17p – (dec, 3sc) * 3 (12)
18-19rr – 12sc (2 rows)
Change color to 2nd additional color (purple)
20p – 12inc (24)
21-22rr – 24sc (2 rows)
Finish knitting sl-st. Trim the yarn, leaving a tail that is long enough
(30cm) to sew the leg to the body. Fill up very tight.
Ears (2pcs):
We knit with yarn of the 1st additional color.
1p – 6sc into magic ring
2p – 6inc (12)
3p – (1sc, inc) * 6 (18)
4p – (8sc, inc) * 2 (20)
5p – (9sc, inc) * 2 (22)
6-8rr – 22sc (3 rows)
Change color to primary
9-12rr – 22sc (4 rows)
13p – (dec, 9sc) * 2 (20)
14-16rr – 20 sc (3 rows)
17p – (dec, 8sc) * 2 (18)
18-20rr – 18sc (3 rows)
21p – (dec, 7sc) * 2 (16)
22-24rr – 16sc (3 rows)
25p – (dec, 6sc) * 2 (14)
26-28rr – 14sc (3 rows)
29p – (dec, 5sc) * 2 (12)
30-32rr – 12sc (3 rows)
33p – (dec, 4sc) * 2 (10)
34-36rr – 10sc (3 rows)
Knit another 1sc, then fold in half and knit 4sc. Crop
yarn, leaving a tail long enough (30cm) for sewing.
Assembly (Head-Body-Cap):
Place your head over your body, making sure
so that the ponytails of the yarn are on one side.
This will be the back of the toy. Attach
head to body with sc, capturing
at the same time loops of the head and body.
Fasten the thread, cut, hide the tail.
Put a hat on your head and sew.
Pens:
Sew both handles to the body 1 row below
the connection of the body with the head.
Ears:
Sew the ears to the cap, placing them starting at 5 rows from the center.
Legs:
Sew both legs firmly to the body
Tail:
Sew tail tightly to the back of the body, while stuffing with filler.
Option 1 (Skirt-pack):
Hold the toy upside down, with your back to yourself. Choose where you want
place a pack.
1 row – you need to knit the initial row sc on
toy body: insert the hook horizontally
under 1 loop and exit on the other side of the loop,
grab yarn, stretch and knit sc
(very weak). Insert the hook into the next
loop this row, knit sc as well
This has been done before. Repeat around everything
bodies making sure to stay on the same
next to. Because the body is knitted in a spiral, the end
row will not be at the same level
which is the beginning, so being in the middle
back, you must make the transition. Complete the sl-st row.
2 row – 3 ch lifting and 2dc in the same loop, then we knit
3dc into magic ring Finish sl-st in 3rd ch at
beginning of a row.
3 row – 3 ch lifting, then 1dc into magic ring each loop
previous row. Finish sl-st in 3rd ch at the start
row.
Option 2 (Dress):
Hold the toy upright with your head
down with your back to yourself.
1 row – under 6 next to the body you need
knit the starting row sc on the body
toys: insert hook
horizontally under 1 loop and exit with
the other side of the loop, grab the yarn,
stretch and knit sc (very
weakly). Insert the hook into the next
loop this row, knit sc as well,
as you did before. Repeat
around the whole body making sure that
stayed in the same row. Because body
fits in a spiral, the end of the row is not
will be at the same level as
and the beginning, therefore, being in the middle
back, you must make the transition.
Complete the sl-st row.
2 row – 3 ch lifting and 1dc into the same loop, then we knit 2dc into magic ring each loop
grounds. Finish sl-st in 3rd ch at the beginning of the row.
3 – 7 rows – start with 3 ch and knit further 1dc into magic ring each loop
previous row. Finish sl-st in 3rd ch at the beginning of the row.
8 row (wavy) – 3 ch rise and 1dc in the same loop, then we knit 2dc in
every base loop. Finish sl-st in 3rd ch at the beginning of the row. A thread
trim and hide the tips.
Lami. (see photo for location)
We fix the thread on the back of the sl-st in the 1st row of the dress, knit 19 ch and, as it were
crossing, we go forward and fix there in the middle of 2sl-st, also in the 1st
A row of dresses. Next 19 ch and drive back, crossing with the first strap, fix the sl-st in the 1st row of the dress on the back. Cut and hide the thread
tips.
Backpack
Side parts.
We knit in rotary rows
3 ch rotate
We knit the next 10 rows: 1ch, 3sc, rotate. Fasten the thread and
crop.
Tie another one of the same part.
The main detail.
We knit in rotary rows.
10 ch turn.
We knit 34 rows: 1ch, 10sc, rotate.
Without breaking the thread, put the markers as follows (see figure):
Marker A (MA) – 10 rows down
Marker B (MV) – 2 rows below A
Markers D and E (MD and ME) – same as A and B, only on the other side
Marker C (MS) – 10 rows below D
Assembly and straps
Now we will connect the main part with the side, tying the main
part, attaching the 1st side part, then tying sc top and then
attaching the 2nd side part. To be sure what is right
placed the side parts relative to the main, we will focus
on the markers.
Place the 1st side on the side of the main part of the backpack between
current loop (where we left off) and MA. Now we will knit
capturing the loops of both parts: 1sc in the same loop, 8sc, inc (angle).
Turn the work while continuing to tie the side of the ruzak, 1sc, inc (angle).
Turn back work, 9sc.
We successfully connected the 1st side.
We continue to knit around the top as follows: 11sc, inc (angle), 8sc,
inc (angle), 11sc.
Now you can attach the 2nd side to the main part, knitting again
at the same time loops of both parts. Position the 2nd side along
sides of the main between MS and MD, 9sc, inc (angle). Turn the job, 1sc, pr
(angle). Turn the job, 9sc.
We successfully connected the 2nd side.
Do not cut the thread yet. We still need to make the straps: we knit 3sl-st
along the top of the side to be behind the backpack, 25 ch, 1sc in
the middle of the bottom of the backpack back (see photo), 25 ch, sl-st to attach the 2nd
the little hem is symmetrical to the first at the top of the back of the backpack.
Cut the thread and hide all the ends.
The bow tie:
We knit in rotary rows
3 ch rotate
1 – 4 rows knit: 1ch, 3sc, turn
5 row – 1 ch, 3sc together, turn
6 row – 1 ch, 3sc of 1 loop, turn
7 – 10 rows – 1 ch, 3sc, turn (thread
don’t break off)
Next we bind as follows:
1ch, 2sc, 3sc in 1 loop (angle), 9sc,
3sc in 1 loop (angle), 1sc, 3sc in 1
loop (angle), 9sc, 2sc in 1 loop (1st
row loop), sl-st. Thread cut, leaving
end 20cm long.
Fold the bow tie in half lengthwise
and fasten in the middle with a few stitches. Dial 30ch, fasten
thread and cut, leaving an end length of 30cm. Wrap one end of the chain
ch around the middle of the bow tie 2-3 times. Make a knot and fasten.
Wrap the other end of the ch chain around the bunny’s neck and fasten it under
bow tie. To fasten, pass the yarn through the neck and
print on the back of the head.
